LaserMotive has just announced an Open House on February 23rd for their new shop (mentioned earlier here).  If you are in the Seattle area and have any interest at all in Space Elevators or the technology used in the Space Elevator Games or just want to talk to anyone from the LaserMotive team, here’s your chance to take a close-up tour.

Also, I did hear from LaserMotive’s Jordin Kare about what they were up to, especially at the recently concluded Photonics West Show:

[Space Elevator Blog – SEB] – Why did Lasermotive decide to use DILAS equipment in the 2007 Space Elevator Games?
[Jordin Kare – JK] – We had been talking to a couple of other companies, and had found at least one workable option, but we held off placing an order until after Photonics West.  I talked to several manufacturers at last year’s Photonics West.  I also talked to people I knew  from a company I used to consult for, who are heavy users of laser diodes, and they strongly recommended I talk to DILAS.  I spoke to Georg Treusch at PW, and we made a deal on the spot.

[SEB] – What factors will be most important to you and Lasermotive in deciding what power source you’ll be using in this year’s Games?
[JK] – Ease of development and overall project cost.

[SEB] – Will Lasermotive be attending the Photonics West show and will Lasermotive be “interviewing” with TRUMPF for possible use of their equipment?
[JK] – I’ll be at PW, but on behalf of my employer, not (primarily) LaserMotive.  However, I’m sure I’ll talk to some of the laser companies while there.  I won’t discuss (at least for publication) any particular plans.

[SEB] – What are Lasermotive’s goals for this year’s competition?
[JK] – Compete and win!   Seriously, we have decided we’ll try to compete this year, despite the short schedule, but we are still deciding exactly what we’ll build — and we’re still very concerned about the feasibility of Spaceward’s proposed contest setup.

Thank you Jordin!

While perusing the current list of team’s entered into this year’s Climber/Power-Beaming competition, I noticed that the National Space Society (NSS) had recently been added to the mix.  Now I’m a member of NSS so I was quite intrigued as to what they planned to do.  I recently spoke with Bert Murray from the NSS.  Here is what I learned from the conversation.

Bert (with the enthusiastic backing of George Whitesides, the Executive Director of NSS) has recruited the beginnings of the NSS team.  In addition to Bert (who is the team lead), the team includes Matt Abrahms (Chief Engineer), Steve Laroche (command and control), Chris Barnes, Aaron Bakos (who works at Bosch Home Applications, a company that uses Trumpf lasers for fabrication) and Al Burke (Robotics).

Matt Abrahms, as you may recall, was the guy who was behind the Starclimber entrant into the 2006 Space Elevator Games.  It’s great to see him back in the picture.

Bert is looking to expand this team (to at least 10 members) with the emphasis of making it a “senior team”.  Bert, who has 30 years experience in the aerospace and transportation industries, works at Lockheed-Martin during his “day job”.  He is looking to put together a team that has an “engineering” mindset, meaning a heavy emphasis on planning, project management and testing, testing, testing (“build a little, test a little, learn a lot”).

IMHO, the only teams with a chance to win the Climber/Power-Beaming prize now, with the requirements so high, are teams that take this engineering-management approach so I certainly concur with the way they are organizing.

They have talked with Trumpf about using their equipment as a power source; talks are ongoing.

Bert tells me that they want to compete in 2008, and hopefully win, of course, but they are starting late and are focused on the competition in 2009 as well (as is the team from the University of Michigan).

Here’s wishing them luck!

Regular readers of this blog or those that follow the goings-on at the Spaceward site know that TRUMPF decided to help out, big-time, in the upcoming Space Elevator Games.  This is well-summarized on the Spaceward web site:

“We’re thrilled to announce that Laser tool manufacturer TRUMPF has stepped forward with a lucrative offer to support teams with its state-of-the-art laser equipment.

Being the world leader in laser technology, TRUMPF took a natural interest in the power beaming games, and is providing both hardware and expertise to enable the 1-km climb.”

I have posed several questions to TRUMPFlger Schlueter about the technology, the upcoming games and TRUMPF’s goals.  He (and Dave Marcotte, also of TRUMPF) have kindly answered.  Note that if you are unable to read all of the slides or the table, you can click on them for a larger version.

Space Elevator Blog [SEB] – I noticed that in the current issue of “Laser Community” (http://www.trumpf-laser.com/208.img-cust/Laser_Community_03-2007_en.pdf), a TRUMPF publication, the last page states the following: “100,000 Kilometers: Across this distance, laser beams may one day power the motors of the so-called Space Elevator…”  Before last year’s Space Elevator Games, were you aware of the concept of the Space Elevator?  If so, how did you learn about it?
Holger Schlueter [HS]– Hello Ted !  TRUMPF is a big, multinational company – I actually saw the laser community magazine for the first time yesterday. I was as surprised as you. TRUMPF in Germany was obviously as intrigued by the space elevator concept as we were here in the United States. Maybe they had read the same Spiegel Online article that I had read. Well, anyways, end of October I sent Ben a message with a terribly faulty calculation claiming the space elevator would never work because of the beam divergence. Ben, being the nice and courteous person he is, wrote back friendly and humbly pointed out the embarrasing mistake I had made. So I did the calculation again and realized you actually can transmit a multi-kW laser beam several hundred thousand km into space with manageable divergence. So I repented 😉 and a very good relationship with Ben began.

Did I know about the space elevator before?  Faintly in the back of my head I recollect something about the Space Elevator, but I always put it into the realm of impossible science fiction because it seemed so infeasible to me.

[SEB]– What do you think of the idea of a Space Elevator and do you think that TRUMPF equipment can play a key part in its construction?
[HS] – Well, the two big obstacles are:

1. Beam divergence and control of multi-kW beams – after correcting the calculation it seems very feasible to me that lasers can provide the necessary 1000 kW class beam with the necessary beam quality.
2. Tether strength – I don’t understand much about it – but it seems the teams around the world are making great progress.

As a laser source you have several different options:

1. Diode lasers
2. CO2 lasers
3. Diode pumped solid state lasers – here you have basically another three options – see slide:

.

In evaluating the beam sources there are many aspects to consider, for instance: Power, Scalability, Beam divergence, Efficiency, Wavelength, Receiver efficiency.

Here is a compilation of currently relevant laser technologies:

.

Beam quality and Brightness: Power scalability itself is not the important aspect – it is important to be able to increase the power without changing the beam quality of the beam (for TRUE power scalability see: http://arxiv.org/abs/0711.3987v1).  Beam quality is measured as half the beam divergence times the beam radius (units: mm mrad) and tells you for a given beam diameter the divergence of the beam. Beam quality cannot be improved using passive optical elements without reducing the power of the beam. In other words: The brightness (Power per steradian) of a beam source cannot be increased using passive optical elements.  This is VERY important for the space elevator, since we want to shoot the beam at a receiver that can be up to 100,000 km away.  Ben tells me, one needs full power on the elevator up to a distance of 6,000km then a portion of the beam is good enough. I have to believe him there. So, taking these numbers you have for instance for the available Disk laser: 10 kW with 8 mm mrad beam divergence with a (hypothetical) laser aperture of 10 m diameter sending the beam space ward (I chose 10m as it represents todays largest optical telescope apertures, for instance Keck Observatory in Hawaii – you need diffraction limited optical performance on the sending end – therefore this seems a good comparison to me).  In this case the beam grows with a divergence of 1.6e-3 mrad (8 mm mrad / 5000 mm) – the radius therefore grows by 1.6mm for every km – 9600 mm in 6,000km distance.  The entire beam therefore has a diameter of 30 m (2 x 9.6m+10m) in 6,000 km distance. That seems quite feasible to me for a space craft as the receiver does not have to be diffraction limited, it only requires the size.

By building more advanced resonators we can filter higher order modes in the disk laser and achieve 12 kW with 1 mm mrad (This is a hero results that was actually achieved in government lab). That already gives us a beam size of 12,4m instead of 30m!

In order to now scale this power to 100 or even 1000kW the thin disk laser gives us several options (from now on I only talk hypothetically and about hero results):

• We can currently extract 7 kW per disk and can put 4 disks optically in series – that should allow us eventually to achieve 28 kW at 1 mm mrad – putting disk in one resonator in series does not decrease the beam quality.
• We can wavelength combine at least 4 different wavelength into a 28 kW x 4 = 112 kW of the same beam quality (since you can superimpose beams of different wavelength without deteriorating the beam quality – called wavelength multiplexing).

This gives us – quite feasible in the next 5 years – 112 kW at 1 mm mrad.

If we would now install 10 separate beam stations that would track the space elevator with a gimble system we can achieve 1000 kW beam with TODAYS’ technology!

BUT NOW TO ANSWER YOUR QUESTION:

The most important property of the Thin Disk Laser is its ability to be scaled into the 100 kW regime without sacrificing beam quality. This is the major advantage the Thin Disk Geometry has over the fiber geometry for the space elevator project. For an exact definition of power scalability see the following article: http://arxiv.org/abs/0711.3987v1. In this slide you can see that limitations on the scalability of the disk concept to power becomes relevant only at 100 kW per disk or more.

.

Another big obstacle will be the receiver efficiency at the different wavelengths.

1. Diodes have an advantage since their emission wavelength can be tailored to match maximum quantum efficiency of the receiver material and they are they might even allow the usage of Si as the receiver material. TRUMPF has a diode laser factory near Princeton, New Jersey – I was their GM for three years – and I can see possible advances with super high brightness diodes and dense wavelength multiplexing that might make this another good contender for the beam source of a real elevator.
2. CO2 lasers emit at 10.6 um – there is no direct conversion using the photoelectric effect feasible – therefore you would need a thermoelectric conversion process, for instance a sterling engine could be used.
3. The diode pumped solid state lasers (Disk, Fiber, Rod) emit beyond the fundamental absorption line of Si and therefore need Ge receivers or even ATJ (advanced triple junction – three different receiver types on top of each other) (see the graph below and the white paper link below):

.

Excerpt from http://www.emcore.com/assets/photovoltaics/Emcore_Manuscript_Fatemi_3P-B5-03_WCPEC-3.pdf.

Ben should tell you some more about the finite efficiency of all receivers, as this will provide maybe the THIRD large challenge for the space elevator project – how do you actually remove the excess heat in space that stems from the limited efficiency of any such receiver. And the heat generated may be substantial: Imagine a 1000 kW beam converted with 80% efficiency – you still have to cool 200 kW – how do you do that in vacuum?

[SEB] – What are you offering this year to teams who want to use your equipment?
[HS]– We have promised to offer at least a 8 kW TruDisk laser with 8 mm mrad. This laser is fiber delivered and the teams would have to interface into our safety system and our fiber delivery receptacle. We can provide all the necessary documentation and components for the teams. They will also get enough test time at our or our partners labs.  The project leader for the actual interaction with the teams is Dave Marcotte, our national head of the service and training organization – he is a space enthusiast himself I would like you to ask him directly about the exact deliverables of TRUMPF.
Dave Marcotte [DM]– We look forward to assisting the groups as they progress.  We are estimating the need for 4 “hot laser” testing opportunities for each team at intermediate points in the development process.  We also plan to have a “dress rehersal” before the big competition.   TRUMPF and the teams will need to work together on the “design of test” for each phase.  We have highly knowledgeable people in our Service Group, Product Management and R&D who can be referenced for insight on laser technology, optics, interfacing, safety and integrated systems.

[SEB]– I understand that TRUMPF will be interviewing contestants in this year’s Space Elevator Games at the upcoming Photonics West Trade Show.  What are you going to be looking for?
[DM]– Difficult question.  Basically, I feel key elements of a successful development project are knowledge, organization, attitude and resources.  We will consider the skill set of the group and how the players are presented as a knowledge base.  We will consider the proposed approach to solving the problem, more than the hypothetical solution.  An organized project plan with a best guess on which skills will be utilized is important to pulling the various technologies together into an integrated solution.  Frequently I have seen attitude as a defining difference when presented with development frustrations and failures encountered by individual members and the team.  There is a saying… something like…. “Inspiration vs Perspiration”.  Available resources are unfortunately not connected to knowledge, organization and attitude.  I have seen great guys, who work together seamlessly, but without resources (hardware, software, time, space…) they are starved and unable to demonstrate success.  The resources the group brings to the table will complete TRUMPF’s contribution.

[SEB] – Are you planning on attending the Space Elevator Games this year?
[HS] – Absolutely & I hope to ride the first elevator in 2025.
[DM]– As project manager I plan to be at the games to make sure the laser is transported, installed and operating, with all teams supported.  As for the first elevator ride… I will keep the load balanced, riding with Holger.  🙂

Thank you very much gentlemen for your time.  I look forward to meeting you at the upcoming Games.

The University of Michigan’s MClimber, an entrant into the 2006 Space Elevator Games – Power Beaming competition, had the distinction of being the first entrant to make it all the way to the top of the ~50m ribbon.  They were not able to do so in a prize-winning time, but it was an impressive showing nonetheless.  They intended to compete in the 2007 Games but due to various internal issues they could just not get ready in time.

However, they are raring to go in this year’s Games.  I asked their team captain, Andrew Lyjak, for his thoughts on the upcoming Games and received this reply:

Space Elevator Blog [SEB] What factors will be most important to you and the M Climber Team in deciding what power source you’ll be using in this year’s Games?
[MClimber] The MClimber team went through a very rigorous analysis of whether we wanted to proceed with a Microwave or a Laser power beaming system. As you may know, our initial plan was to go with a Microwave system, but due to a variety of factors we have instead proceeded with development of a Laser system. Some of the considerations that lead us to reach this decision were:

1)Team experience with Photovoltaic cells. While we have been using photovoltaic cells to power our climber for the past couple years, Microwave rectenna design was a new field to us. The price of development for similar rectenna and photovoltaic systems was calculated out to be a lot closer than we had originally anticipated and so we chose to stick with what we know, choosing a photovoltaic receiver array over development of a rectenna receiver.

2) Safety considerations: We are a student project, and so when our occupational safety department advised us to stay away from developing a microwave power beaming system, we listened. Lasers are not new to the U of M campus, which made it a lot easier for us to get the go ahead from the safety department for a laser system.

3) Cost: Originally we believed that a laser capable of producing the power that we needed was way beyond our budget, but now we believe that the cost of a laser system is something that we can afford, albeit with a lot of work. Subsequently we now have a full time business team to work with the engineering community and get our name out, and get some sponsors. Our business plan is modeled after the highly successful U of M solarcar team.

[SEB] Will the M Climber Team be attending the Photonics West show and will you be “interviewing” with TRUMPF for possible use of their equipment?
[MClimber] MClimber would like to attend the Photonics West show but does not have the budget at this time to afford the trip. Currently we have plans to talk to TRUMPF in a Detroit location.

[SEB] What are the M Climber Team’s goals for this year’s competition?
[MClimber] MClimber will be demonstrating a rugged climber system in 2008, capable of ascending and descending the 1km tether many times without risk of failure, and will be testing controls systems for the climber. We plan competing in 2009.

[SEB] And one more question.  After M Climber’s great showing in the 2006 competition, we missed you, very much, in the 2007 competition.  What happened – what caused you not to compete last year?
[MClimber] MClimber ran into prototyping issues in the summer, that spiraled out of our control and resulted in us losing too much time to consider competing in October.

Thanks Ted!

Andrew Lyjak
andrew.lyjak [at] gmail.com
(734)604-6163
MClimber team lead
http://mclimber.org

I look forward to their entry this year.  Their 2006 entry was compact, elegant and well-built.  I expect nothing less from this year.  And, as they’ve been down this road before (i.e., they are an experienced team), they will be someone to reckon with in the competition (either this year or next).

TXL is a new entrant into this year’s Space Elevator Games Power Beaming Competition.  They are planning on using lasers to power their climber, but not in the “conventional” sense, i.e., beaming the lasers onto photovoltaic cells and running their motors off of the resultant electricity.

I emailed David Nemir, the fearless leader of team TXL to ask him what they planned to do.  Here is his reply:

“TXL Group is a start-up company that was founded in 2007 to refine and produce a high efficiency thermoelectric generation technology that has been under development for several years. Thermoelectric devices generate electrical power from a thermal differential. As TXL migrates from theory to lab to field, we are interested in venues where we can showcase our technology and “make a lot of noise”.

There will be substantial waste heat with any laser powered application and thermoelectric generation represents a means to recover some of that energy. We have been watching the space elevator competition since its inception, with an eye to donating thermoelectric cells to one or more teams in exchange for press and PR coverage. However, at the present time, since TXL does not have a finished product and is not yet prepared to release proprietary information, the company decided to field its own entry.

Our concept is to use a combination of phase change and thermoelectric technology to provide energy to the climber. Maintaining the “cold side” temperature is a major challenge and we will likely use a closed cycle radiative heat exchanger as part of the system.

Because our approach is based upon heat, we are not concerned about the wavelength of the laser and so the 1020 nm laser that Trumpf has so generously offered seems like a good fit. The TXL Team will be attending the Photonics West show and will be talking to TRUMPF at that time.  During the show, we would like to also meet with others in the Space Elevator community. Jan Beck and I will be at the show on Wednesday afternoon and Thursday morning and we can be reached by cell at (915) 449-1907.   Give us a call — we’ll buy the coffee.”

So there you have it.  If you are a member of another Power Beaming team or a member of the press and you are attending the show (I’m jealous if you are), give Jan or David a call.

It occurred to me that some other Climber entries have also tried to power their entry via heat by using Stirling Engines – none successfully so far.  I looked up Thermoelectric Effect in Wikipedia (sorry, Dr. Edwards) and found that it is quite different.  I will be very curious to see how well they do this year.  Good luck to them!

Teams competing in this year’s Space Elevator Games are sure to beat a path to the DILAS booth at the Photonics West Exhibition.  Both USST and Lasermotive, the two laser-powered teams in the 2007 Space Elevator Games, used Laser Diode products from DILAS to power their climber and many more are certainly considering using them this year.

Dr. Georg Treusch from DILAS has kindly consented to answer a few questions for the Space Elevator Blog:

Space Elevator Blog [SEB]:Before being approached by USST and Lasermotive, were you aware of the concept of the Space Elevator?
[Dr. Treusch]: Yes, I have been in contact with Brad Edwards since the Games in Albuquerque.

[SEB]: What do you think of the idea of a Space Elevator?
[Dr. Treusch]:Very challenging to accomplish. In general it is a very good idea and at the same level and beneficial for the world as the solar car competition in Australia which will lead us away from burning our resources.
 
[SEB]: What are you and DILAS offering this year to teams who want to use your equipment?
[Dr. Treusch]: We are talking right now to more than 5 teams about using our new design which has to be finalized after we have solicited all needs from the teams. It will be a 2.5kW base module with all the optics to generate the beam for the 1 km distance and a motorized optic to match the beam to the panel size at various distance.

[SEB]: In the 2007 Games, both USST and Lasermotive used DILAS laser diodes.  For the uninitiated (including myself), what is the difference between a “laser diode” and a “laser”?
[Dr. Treusch]: A laser typically generates one beam with high brightness using a gain medium and two mirrors. A laser diode does the same on a miniature scale. The emitting area is about 1 um high and typically 50 – 200 um wide the cavity length (distance between the mirrors) is about 1 – 3 mm with an output power of 3-5W. To get to more power those emitters are arranged on a laser diode bar (10mm wide, up to 50 emitter) with >100W power. The bars are mounted on high efficient heat-sinks which can be stacked for even more power. By combining multiple emitters the power can be increased but not the brightness. A fiber laser or disk laser with > 1kW power may have a beam quality of less than 3 mmxmrad (beam size x divergence) whereas the diode laser stack has a 10x higher value and therefore a lower brightness.

[SEB]: Telling us as much as you can divulge, how would you compare the approaches between Lasermotive and USST in using DILAS equipment?
[Dr. Treusch]: USST used the approach for an optimized optical system for the maximum distance required and matched the beam size at lower altitudes to the panel with optics.  Lasermotive used stacks with lower brightness and did spread out the beam already at ground level (more optics needed and hard to control and to keep the stacks protected).

[SEB]: I know you attended last year’s Space Elevator Games.  Are you planning on attending the Games this year too?
[Dr. Treusch]: For sure and I will be available at the Photonics West show in San Jose next week at our booth #6073.

Thank you Dr. Treusch!